JM Modern HikaShop - шаблон joomla Видео
(06-1) 619-8321

Közvetlen fűtésű CO2, NU-5800

The In-VitroCell ES NU-5800 Direct Heat Laboratory CO2 Incubator is designed to provide a controlled in-vitro environment by providing the desired functionality needed to encourage cell culture growth for research at or near body temperature.




NuTouch Intellgient Interface

NuAire In-VitroCell ES CO2 Incubators utilize the NuTouch Intelligent Interface incubator electronics

A microcomputer and color touchscreen allows users to maintain the CO2 Incubator growth chamber with the touch of a finger. Designed for high user adoption, NuTouch utilizes familiar icons and text allowing users to easily control chamber parameters. Onscreen descriptions and step-by-step directions are available for icons or operations that may not be familiar. NuTouch monitors the incubator at all times and informs users with status indicators, alarm menus, and maintenance reminders while the incubator is in operation. An onscreen historical performance monitor is available to view any large variations in gas or temperature. Service settings and diagnostic controls are offered for service personnel.

Available in English, French, German, and Spanish (More to come)


Infrared (IR) Sensor

NuAire CO2 Incubators utilize a Infrared (IR) sensor

A microprocessor-based, non-dispersive, single source dual wave infrared (IR) sensor monitors and controls CO2 levels inside the growth chamber. Wavelengths are only absorbed by CO2 making measurement insensitive to other components, such as water vapor. The stable IR sensor has a controlled range of 0.1 to 20% accurate within 0.1%.


Constant Contamination Control (C3)


Closed Loop HEPA Filtration

NuAire In-VitroCell ES CO2 Incubators utilized Closed Loop HEPA filtraion to maintain a proper incbuator growth chamber

A maintenance free air pump continuously draws environmental samples from two locations inside the chamber and passes the sample through a 99.99% HEPA filter before entering the sensor bay to measure gas. The IR sensor measures CO2 gas levels from the sample to monitor before injecting back into the growth chamber. The NuTouch Electronic Control system will then determine the appropriate course of action to maintain chamber set-point conditions by placing the system on standby or injecting 99.99% HEPA filtered CO2 gas or air into the growth environment.


ISO Class 5 Cleanroom Conditions

Based on clean room technology, In-VitroCell maintains the growth chamber at positive pressure similar to an ISO Class 5 Clean room to slow airflow to minimize desiccation. Anytime the chamber door is open to the laboratory environment, clean HEPA filtered will be forced out instead of contaminated lab air being drawn in.


Temperature Uniformity

The chamber walls are surrounded by five (5) heating elements to control temperature. A door heater is separately controlled to minimize condensation on the inner chamber door. The heating elements are wrapped in a high density R5 insulation to maintain temperature integrity. Dual temperature sensor probes monitor and control temperature set points to ensure consistency and uniformity throughout the chamber.

Advanced Construction


Attention to Proper Materials and Construction Methods

The inner chamber is constructed of high grade 16 gauge, type 304L polished stainless steel using crevice-free construction that provides an easily cleanable inert surface that does NOT promote biological growth. Seamless coved interior corners are easily cleaned promoting a healthy growth chamber. A single piece gasket creates a liquid tight seal from incubator chamber to inner door to eliminate condensation build up and potential contamination. Inner chamber shelving and gasket may be removed and routinely autoclaved if desired.


Small Footprint, Incredibility Large Useable Space

A large 7 cubic foot (200 Litre) growth chamber comes standard with four incubator shelves with a maximum capacity of 23 shelves. By attaching heating elements directly to the chamber and insulating with High Density R5 insulation In-VitroCell was engineered as a compact design while maximizing chamber capacity.


Upgrade Your System

CuVerro Antimicrobial Copper Surfaces

CuVerro® Antimicrobial Copper Surfaces (Optional Feature)

Add CuVerro® Antimicrobial Copper Surfaces to the incubator growth chamber and/or shelving to kill bacteria* to minimize potential incubator contamination. CuVerro® is laboratory tested and EPA registered. CuVerro® Antimicrobial Copper Surfaces kill more than 99.9% of bacteria* within 2 hours, and continues to kill 99% of bacteria* even after repeated contamination, when cleaned regularly.

EPA Reg No 85353-5

EPA Est No 088257-MN-001

*Laboratory testing shows that, when cleaned regularly, CuVerro® antimicrobial copper surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: MRSA, Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, and E. coli O157:H7. CuVerro® antimicrobial copper surfaces are a supplement to and not a substitute for standard infection control practices and have been shown to reduce microbial contamination, but do not necessarily prevent cross contamination; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces.

Standard Features

Four (4) Stainless Steel Shelves

Eight (8) Stainless Steel

Shelf Brackets

Shelf Guides

Right Hinge Door Swing

Remote Alarm Output Contacts

4 to 20 mA Analog Output

RS-485 Communication

USB Port

CO2 Sample Port

Adjustable Leg Levelers

Access Port and plug with breather holes

One (1) Water Pan

One (1) 6.5 ft. / 2 m Electrical Cord

Optional Features

CuVerro® Antimicrobial Copper Surfaces

Automatic CO2 Tank Switch (External)

CO2 Tank Alarm

Left Hinge Door Swing

Additional Shelves with Slide Brackets

CO2 Analyzer Fyrite Kit (Dry) 0-20%

Replacement Fluid for CO2 Analyzer

Surge Protector

CO2 Regulator (2 Stage)

Custom Solutions

Műszaki specifikációk



Chamber Volume 7.06 ft.3 / 200 L
Exterior Dimensions (W x D x H) 
in. [mm]
26.75 x 27.0 x 41.5 [679.5 x 691 x 1054]
Chamber Dimensions (W x D x H) 
in. [mm]
21.15 x 21 x 26.5 [546.1 x 533.4 x 673.1]
Weight 235 lbs. / 106 kg.

Shelf Capacity

Dimensions (W x D) in. [mm] 19 ¾ x 18 ¾ [502 x 476]
Supplied 4 Shelves
Max. Capacity 23 Shelves
Max. Weight Capacity 20 lbs. (9 kg) per Shelf
  50 lbs. (23 kg) per Incubator

Utility Connections

Gas Connections 0.25" (6.3 mm) Tubing
Gas Input Pressure 20 PSIG (1.4 BAR) Input Pressure Maximum. Two Stage Gas Regulator Required

Electrical Requirements

Startup Power 625 watts
Running Power 250 watts
Heat Rejected 14 BTU / minute

Temperature Control System

Sensor Type Precision Integrated Circuit
Range 5°C to 55°C (5°C aboveambient to 30°C max. ambient)
Accuracy ±0.1°C
Uniformity ± 0.3°C at 37°C
Recovery 0.12°C/minute Average
Display Resolution 0.1°C
 Minimum Qualifications for Sterilization
145 DEG Cycle 135°C
95 DEG Cycle 85°C

CO2 Control System

Sensor Type Infrared single source dual wave length
Range 0.1 to 20%. (0.0 set point idles system)
Accuracy ± 0.1%
Recovery Up to 5% ±0.2% / -0.5 in 5 minutes average
Display Resolution ± 0.1%
CO2 Control Logic Fixed/Algorithm/Manual, Environmental Adaptable

Quality Asssurance

ULUL-C, CE, Energy Saver, RoHS, Constant Contamination Control, Critical Cleaning Components
  • RS-485 Communication for In-VitroCell Incubators
  • 4-20mA Analog Output for In-VitroCell CO2 Incubators
  • Improve the Performance of your CO2 Incubator
  • CuVerro® Care and Use

    NuAire products manufactured with CuVerro® have specific care and use instructions to assure maximum customer satisfaction. CuVerro® is a class of copper based alloys that continuously kill bacteria associated with life science laboratory contamination. These surfaces represent the only class of EPA-registered solid surface materials that actively kill bacteria. CuVerro® is suited for common surfaces where contamination is a concern. Laboratory surfaces benefitting from CuVerro® are inherently any work surface that can harbor contamination. NuAire fabricates CuVerro® in many ways to produce a variety of products for the laboratory. Understanding the care and use of CuVerro® will maximize its benefit and visual appearance. Find additional information at

    CuVerro® may be cleaned with various laboratory surface disinfectants by different methods. For all surface disinfectants, follow application and use instructions provided by the manufacturer. Download the whitepaper to view a list of surface disinfectant types and their visual effect on CuVerro®. --- CuVerro® Care and Use

Tartozékok, kiszerelések
  • IsoBar Surge Suppressor

  • CO2 Regulator Two Stage

    CO2 Regulator Two Stage

  • Dry In-Line Filter

    Dry In-Line Filter

  • Wet In-Line Filter

    Wet In-Line Filter

  • Refill CO2 Analyzer Fluid Kit

    Refill CO2 Analyzer Fluid Kit

  • CO2 Analyzer Fyrite Kit

    CO2 Analyzer Fyrite Kit

  • External Tank Switch

    External Tank Switch

  • CO2 Regulator, Single Stage

    CO2 Regulator, Single Stage

  • CO2 Incubator Tubing

    CO2 Incubator Tubing

  • Mobile Platform with Leg Leveling Casters and Mounting Brackets for In-VitroCell ES CO2 Incubators

    Mobile Platform with Leg Leveling Casters and Mounting Brackets for In-VitroCell ES CO2 Incubators

  • CO2 Incubator Tank Alarm

    CO2 Incubator Tank Alarm

  • Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)

    Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)

  • Incubator Water Pan (In-VitroCell ES Series)

    Incubator Water Pan (In-VitroCell ES Series)

  • CuVerro® Antimicrobial Copper CO2 Incubator Shelf and Guide Brackets (In-VitroCell ES Series)

    CuVerro® Antimicrobial Copper CO2 Incubator Shelf and Guide Brackets (In-VitroCell ES Series)

blue down arrowForgalmazott termékeink gyártói